Page 19
• SPIN entry: For each SPIN entry user need to select PIN code value, Counter value which
defines how many time the PIN code will be valid and optional a User name. Counter will
be decreased each time SPIN code will be used.
8.6 CALLER ID ACCESS
Caller ID access is a very simple way to control relay output defined in Caller ID output setting.
User will by calling in the SOLO-NX unit trigger defined output.
Settings for this function are found in the Caller id # tab.
Figure 11: WEB Server-Caller ID Access
General settings:
• Caller ID security mode: User can select between 3 options:
Caller ID Disabled deactivates caller ID function – all numbers are restricted
Caller ID for specific users will limit the caller ID function only to the numbers on the list.
Caller ID always ON will allow all user that know the number of the unit to open defined
output. In last option the user doesn’t need to be on the list to trigger the output
• Caller ID output: Selecting the output that will be triggered in Caller ID function.
To Next Page