Page 22
8.8 SOLO-NX WIEGAND OUTPUT INTEGRATION
SOLO-NX unit can be integrated into a bigger access system using a Wiegand interface. In this case
number's calling the SOLO-NX unit will be transferred, over Wiegand interface, to access system.
Figure 13: WEB Server-Wiegand Output settings.
Configuration of the Wiegand output interface
• Wiegand Type: Type of the Wiegand used (W26 is most common setting)
• Data format: Format of data set on the selected Wiegand type.
• Front parity, trailing parity: Selection of the proper parity in selected Wiegand type.
• Facility code: Is required, user can define facility code to Wiegand data.
To Next Page