Page 29
8.13 PIN ACCESS NOTIFICATION FUNCTION
This function is used to notify administrator when a selected pin code is being used. Notification is
done by SMS send to the selected administrator numbers.
Global enabling of the notification function is done in 2. steps.
STEP 1: User has to select Enable option in the Enable Pin Notificaiton function.
STEP 2: Send the configuration to the device!!
This procedure is ONLY done 1 time when enabling this function.
Figure 20: WEB Server-Global enabling of the notificaton function.
After the notification function is enabled, user can select which pin code will send the notification
SMS. This is done by placing a tick in the check box of the pin code notify field.
To Next Page