Control panel menus 29
INFORMATION
POWER ON TIME
TOTAL 0 ... XXX HR
Display hours fixture has been powered on
since manufacture (not user-resettable)
RESETTABLE
CLEAR
COUNTER? YES/
NO
Display hours fixture has been powered on
since last counter reset (user-resettable)
POWER ON
CYCLES
TOTAL 0 ... XXX HR
Display number of times fixture has been
powered on since manufacture
(not user-resettable)
RESETTABLE
CLEAR
COUNTER? YES/
NO
Display number of times fixture has been
powered on since last counter reset (user-
resettable)
SW VERSION* XX.XX.XX Displays currently active software version
RDM UID* 4D50.XXXXXXXX Displays fixture’s unique RDM ID
LED TYPE* COLD/WARM
Displays fixture’s LED color temperature
type
FAN SPEEDS*
HEAD FAN 1...
BASE FAN 3
0 - XXX RPM
Displays current speed of all cooling fans
(head and base)
TEMPERA-
TURES*
CMY EFFECT ...
DC/DC
X C Displays temperature in °C of all PCBs
DMX LIVE*
RATE 0 - 44 HZ
DMX transmission speed in packets per
second
QUALITY 0 - 100% Percent of packets received
START CODE 0 - 255 Value of the DMX start code
STROBE ...
CONTROL
...
Scroll to see values being received on
each DMX channel
TEST*
TEST ALL
Run test sequence of all functions
To test a specific function, use Up/Down
buttons to scroll through functions and
pause. Press Enter to restart test
sequence.
Press Menu button to exit test.
TEST LEDS
Run test sequence of LEDs only.
To test a specific LED group, use Up/Down
buttons to scroll through groups and
pause. Press Enter to restart test
sequence.
Press Menu button to exit test.
TEST EFFECTS
Run test sequence of effects.
To test a specific effect, use Up/Down
buttons to scroll through effects and
pause. Press Enter to restart test
sequence.
Press Menu button to exit test.
TEST PAN/TILT
PA N
Run test sequence of pan functions. Press
Menu button to stop test
TILT
Run test sequence of tilt functions. Press
Menu button to stop test
MANUAL
CONTROL*
RESET RESET Reset fixture
STROBE ...
CONTROL
0 - 255
Scroll through effects, then enter a DMX
value to manually control an effect
Menu level 1 Menu level 2 Menu level 3 Menu level 4 Notes (Default settings in bold print)
Table 3: Control menus
To Next Page
Loading...
