Martin maxium - Table of Contents

Martin maxium & maxium Beamer Operating Instructions
V 2.0
2
Table of Contents
1 Introduction..............................................................................................6
2 Product Liability & Warranty...................................................................7
2.1 General Information..................................................................................................7
2.2 Scope of Delivery......................................................................................................7
2.3 Warranty ....................................................................................................................8
2.4 Hotline........................................................................................................................8
3 Intended Use and Working Principles....................................................9
3.1 Intended Use of the Martin maxium ........................................................................9
3.2 The Monopolar Working Principle...........................................................................9
3.2.1 Monopolar Cutting ..................................................................................................... 10
3.2.2 Monopolar Coagulating.............................................................................................. 10
3.2.3 Neutral Electrode (NE)............................................................................................... 10
3.3 The Bipolar Working Principle...............................................................................10
3.3.1 Bipolar Cutting ........................................................................................................... 11
3.3.2 Bipolar Coagulating ................................................................................................... 11
3.3.3 Seal Safe / Vessel Sealing......................................................................................... 11
4 Description of the Unit ..........................................................................11
4.1 Front Connectors....................................................................................................18
4.1.1 Monopolar Connectors .............................................................................................. 18
4.1.2 Bipolar Connectors .................................................................................................... 20
4.1.3 Neutral Electrode Connector...................................................................................... 22
4.2 Connectors on the Unit’s Rear ..............................................................................22
4.2.1 Footswitch Connectors .............................................................................................. 22
4.2.2 maxium Beamer Interface.......................................................................................... 23
4.2.3 Interface Connectors ................................................................................................. 23
4.2.4 Equipotential Bonding Connector............................................................................... 23
4.2.5 Mains Connection...................................................................................................... 24
4.3 Controls ...................................................................................................................24
4.3.1 Power (ON/OFF) Switch ............................................................................................ 24
4.3.2 Channel Selector Buttons .......................................................................................... 25
4.3.3 MENU Button............................................................................................................. 25
4.3.4 Rotary Switch with Backlighting ................................................................................. 26
4.3.5 Parametrization ......................................................................................................... 27
5 Description of the Display Contents ....................................................28
5.1 Program Line...........................................................................................................28
5.2 Context Line ............................................................................................................28