What to do if device does not detect that the sensor is connected to Masimo Rad-67 Pulse CO-Oximeter Medical Equipment?
If your Masimo device isn't detecting the sensor, try these steps: * Remove and reconnect the sensor. * Make sure the connector is fully connected to the device. * Reapply the sensor to the patient. * Replace the sensor. * Turn the device off and on.
What to do if device does not communicate to other external devices through wireless connection on Masimo Medical Equipment?
If your Masimo device does not communicate with other external devices wirelessly, check the external device compatibility. Also, verify that the wireless feature is on and configured correctly. Check wireless availability for your location and verify network settings and availability.
Why is SpHb Measurement Ability Unavailable on Masimo Rad-67 Pulse CO-Oximeter?
If the SpHb measurement ability is unavailable on your Masimo device, it may be because SpHb is not measured on patients 17 years old and younger. Also, ensure a patient label (when required), age, and gender are entered when performing a spot-check. Make sure the sensor is applied properly, and if the problem continues, replace the sensor.
Why Spot Check Results do not display SpHb (SpHb displays as '- -') on Masimo Rad-67 Pulse CO-Oximeter?
If Spot Check Results do not display SpHb (SpHb displays as '- -') on your Masimo device, ensure the Measure SpHb button is selected during the spot-check. Also, SpHb is not measured on patients 17 years old and younger. Check if blood flow to the sensor site is restricted, and verify the placement of the sensor, reapplying it or moving it to a different site if needed.
General| Brand | Masimo |
|---|---|
| Model | Rad-67 Pulse CO-Oximeter |
| Category | Medical Equipment |
| Language | English |
Warnings about device use, modification, placement, unauthorized devices, and flammable environments.
Warnings on performance, medical decisions, SpHb use, defibrillation, compliance, and modifications.
Warnings about cleaning, maintenance, and avoiding electric shock.
Unpacking, inspection, preparation, guidelines, and initial battery charging for Rad-67.
Procedures for turning the Rad-67 device on and off.
How to use the touchscreen, home button, gestures, and controls for device navigation.
Explanation of the main screen layout, status bar details, and power indicators.
Configuring SpO2, PR, SpHb, Pi settings, and general device settings like Localization and Wi-Fi.
To Next Page
