Why won't my Masimo Rad-5v device power on?
If your Masimo Medical Equipment device isn't powering on, the battery may be low. Try checking or replacing the battery. Also, verify that the trending feature is off, as it may deplete battery life faster than normal.
What to do if my Masimo Rad-5v has a continuous speaker tone?
A continuous speaker tone on your Masimo Medical Equipment device often indicates an internal failure. First, try pressing the Alarm Silence button. If the alarm continues, power down the device and remove the batteries, as the device requires service.
Why buttons do not work on my Masimo Rad-5v Medical Equipment?
If the buttons on your Masimo Medical Equipment are not working when pressed, this indicates an internal failure, and the device should be returned for service.
How to fix no speaker tone on Masimo Rad-5v?
If there's no speaker tone on your Masimo Medical Equipment, the pulse tone might be set to 'mute'. Press the Up Arrow (Rad-5) or Alarm Volume Adjust (Rad-5v) to resolve this. Alternatively, Alarm Suspend may be enabled. Press the Alarm Suspend button until the Alarm Suspend Indicator is no longer illuminated or flashing.
Why won't my Masimo Rad-5v Medical Equipment power on?
If your Masimo Medical Equipment doesn't power on, it might be due to a low battery. Check or replace the battery. Also, verify that the trending feature is off, as it can deplete battery life faster.
What to do if my Masimo Medical Equipment has no speaker tone?
If there is no speaker tone on your Masimo Medical Equipment, the pulse tone may be set to “mute,” or Alarm Suspend might be enabled. Press the Up Arrow (Rad-5) or Alarm Volume Adjust (Rad-5v). Inspect the Alarm Suspend Indicator and press the Alarm Suspend button until the Alarm Suspend Indicator is no longer illuminated or flashing.
Why don't the buttons work on my Masimo Rad-5v Medical Equipment?
If the buttons on your Masimo Medical Equipment don’t work when pressed, it indicates an internal failure, and the unit should be returned for service.
General| Brand | Masimo |
|---|---|
| Model | Rad-5v |
| Category | Medical Equipment |
| Language | English |
Overview of the Rad-5/5v family of noninvasive arterial oxygen saturation and pulse rate monitors.
Lists common and model-specific features of the Rad-5 and Rad-5v pulse oximeters.
Specifies the intended use of the Rad-5 and Rad-5v for continuous and non-continuous monitoring.
States that there are no contraindications for the Rad-5/5v pulse oximeter.
Provides critical safety warnings regarding electrical hazards, damage, and proper use of the device.
Highlights warnings and cautions related to device performance, monitoring limitations, and patient care.
Details warnings and cautions for cleaning and servicing the device safely and effectively.
Outlines compliance warnings related to modifications, disposal, and regulatory standards.
Explains Masimo's proprietary signal processing technology for accurate pulse oximetry.
Describes the principles of measuring functional oxygen saturation using spectrophotometry.
Explains the Signal IQ as an indicator for assessing confidence in SpO2 measurement and pulse timing.
Lists the components of the Rad-5/5v system, including the device itself.
Identifies and describes the controls and indicators on the front panel of the Rad-5 and Rad-5v.
Details the controls and indicators found on the back of the Rad-5/5v device.
Provides instructions for unpacking and inspecting the device for damage or missing items.
Guides the user through the initial setup process, including battery installation and power checks.
Outlines the fundamental steps for connecting sensors and operating the pulse oximeter for patient monitoring.
Covers powering the device, understanding basic indicators like Signal IQ, Perfusion Index, and LEDs.
Details the functions of buttons and indicators on the Rad-5 and Rad-5v front panels for monitoring.
Explains advanced settings, default values, specialized modes, and menu navigation for device configuration.
Covers alarm limit configuration, trend data management, and the TrendCom utility for data transfer.
Guides users through accessing and configuring device settings via specific menu levels (1-4) and special menus.
Describes how alarms are indicated through audible tones and visual indicators.
Explains the low battery alarm condition, its indication, and silencing options.
Details how to suspend or silence audible alarms and the behavior of the indicator.
Lists specific error messages displayed on the Rad-5 and their corresponding solutions.
Lists specific error messages displayed on the Rad-5v and their corresponding solutions.
Provides a chart of common problems, their possible causes, and recommended solutions for the Rad-5/5v.
Details display ranges, accuracy (ARMS), resolution, and pulse rate specifications.
Covers electrical requirements, environmental conditions, physical dimensions, weight, and operational modes.
Describes alarm details, display/indicator functions, safety standards, and EMC compliance.
Provides manufacturer declarations and guidance on electromagnetic emissions and immunity, including separation distances.
Defines the various symbols used on the Rad-5/5v device and its packaging.
Instructions for cleaning the device and guidance on battery installation and replacement procedures.
Details various tests to verify device functionality, including self-tests, button checks, and specific parameter tests.
Outlines policies for repair, the procedure for returning devices, and contact details for technical support.
Covers legal restrictions on product use, copyright, and details the limited warranty terms for the device.
To Next Page
