Need help?Do you have a question about the Masimo Radical and is the answer not in the manual?
General| Type | Pulse Oximeter |
|---|---|
| Brand | Masimo |
| SpO2 Measurement Range | 0-100% |
| Perfusion Index (PI) Range | 0.02-20% |
| Measurement Parameters | SpO2, Pulse Rate, Perfusion Index (PI), Pleth Variability Index (PVI) |
| Power Source | AC power or internal battery |
| Battery Type | Lithium-ion |
| Data Storage | USB |
| Connectivity | USB |
| Operating Conditions | Temperature: 5°C to 40°C, Humidity: 15-95% non-condensing |
| Dimensions | Varies by model |
| Weight | Varies by model |
| Storage Conditions | Humidity: 15-95% non-condensing |
Details the controls, display, and indicators of the handheld unit's front.
Details the controls, display, and indicators of the standalone unit's front.
Specifies AC power needs, voltage, frequency, and safe connection practices.
Describes how to connect the Radical to a multiparameter monitor via SatShare.
Provides guidance for optimal SpO2 and pulse rate measurement.
Explains Signal IQ for quality assessment and handling low perfusion conditions.
Explains alarm settings, silencing, and volume adjustments.
Describes how alarms function and lists common alarm messages.
Lists system messages, their possible causes, and recommended actions.
Provides solutions for common operational issues and system failures.
Details measurement ranges, accuracy, and resolution for SpO2 and pulse rate.
Covers the use, selection, and cautions for Masimo LNOP sensors.
Covers the use, cleaning, and cautions for Masimo SET patient cables.
Details battery charging, estimated run times, and care.
Outlines procedures for testing device performance after repair or during maintenance.
To Next Page