MS8218 True RMS Multimeter
Technological Specifications
Chapter 4 Technological Specifications
General Features
•
Voltage between the measurement end and ground is of 1000V ACIDC. 1000V CAT
III,
2th pollution grade.
•
SOOOO
counts, automatic/manual range, basic sampling rate 2.S tis and SI segment analog bar.
•
When rotary switch being in the positions of mY, logic frequency, diode, resistance and capacitance, the maximum
overload protection voltage will be 2S0V(effective value),while in the positions of
u
A/mA the protection current being
0.64A,and in the position of A, the protection current being 12.SA.
•
Over range indication OL.
•
When the total voltage of batteries being lower than 6.8V, the symbol for battery display will be lighted.
•
Fuse being 0.63A/SOOV(
u
AlmA
end) and
12.SA/SOOV
(A end).
•
Six 7# AA batteries X l.SV.
•
Infrared coupling RS-232C interface.
•
Operating temperature: 0°C"""'30°C (relative humidity 0"""'80%)
31
°C"""'SI
'c (relative humidity
O"""'SO%)
•
Storage temperature: -20°C"""'60°C (relative humidity <= 80%)
•
Altitude: operation less than 2000m,
storage less than 10000m
•
Volume: 200mm X 100mm X 40mm
•
Weight: S60g
38
To Next Page
Loading...
