31
DIGITAL MULTIMETER
OPERATING INSTRUCTION
4.20 TESTING TRANSISTOR
4.20.1 Set the transform switch at
the hFE range position.
4.20.2 Put two plugs ’-‘ and ‘+’ of
multifunction test socket into
COM jack and INPUT jack
respectively.
4.20.3 Identify whether the
transistor is NPN or PNP
type and insert emitter, base
and collector leads into the
proper holes of the transistor
on the multifunction test
socket for testing.
4.20.4 You can get reading from LCD.
NOTE：
• Do not put the plug into the wrong jack.
- 28 -
To Next Page
Loading...
