15
TM
Assembly Instructions
Step 13
Your unit is fully assembled!
Make sure to read and follow the User
Manual before using this appliance.
When transporting or storing the
appliance without the tank attached,
hook the regulator onto the handle to
prevent damage to regulator.
LP Tank
USE AND INSTALLATION OF LP GAS CYLINDER (PROPANE TANK)
BEFORE INSTALLING:
The installation must conform with local codes or, in the absence of local codes, with either the National Fuel Gas
Code, ANSI Z223.1/NFPA 54, Natural Gas and Propane Installation Code, CSA B149.1, or Propane Storage and
Handling Code, B149.2, or the Standard for Recreational Vehicles, ANSI A 119.2/NFPA 1192, and CSA Z240 RV
Series, Recreational Vehicle Code, as applicable.
BEFORE EVERY USE:
Make sure to inspect the hose for leaks, cuts, wear, abrasion, or damage of any sort before using this appliance. If any
damage is apparent, the hose must be replaced with a new hose specified by the manufacturer before further use.
LP GAS CYLINDER
The LP (liquid propane) cylinder specifically designed to be used with this unit MUST have a 20 lb. (9.1 kg) capacity
with a Q.C.C. Type 1 cylinder valve and an overfilling protection device (OPD). Only use LP cylinders with this type
of valve.
To Next Page
Loading...
Need help?
General
