Masterflex MASTERSENSE MFLX07526-10 - About the MasterSense L;S Pump Drive; Key Features of the Pump Drive

1-2 MasterSense™ L/S
®
Digital Pump Drive with Advanced Connectivity
Section 1: Introduction
Masterflex
ABOUT THE MASTERSENSE
™
L/S
 e MasterSense™ L/S Digital Pump drive with advanced connectivity o ers precise  ow control and highly
accurate  uid dispensing ideal for pumping high viscous and shear-sensitive liquids.  ese pumps are also
ideally suited for use where sterile conditions and purity are required. Toxic and hazardous  uids can be
pumped with the proper selection of tubing since the  uid contacts only the tubing and not the pump. All
L/S precision drives include a highly accurate, maintenance-free motor and an easy to navigate touchscreen
that makes setup and operation easier than ever.  e L/S range features Ethernet and Wi-Fi connections for
web-based and monitoring using the Master exLive website (see www.master ex.com), and remote analog
input control and monitoring through the pump drive’s 25-Pin female connection port.
Package Contents
NOTE: Please check the package and its contents for any visible signs of damage. If any damage is found
please contact Technical Assistance immediately (see "
Technical Assistance" on page 5-8).
• Pump Drive
• Power Cable
• OHS Cable
• Quick Start Guide
• Flash Drive Containing the Operating Manual
Features
• A 5-inch multi-language touchscreen display providing easy access to user-de ned operation parameters
and direct readouts of pump operation data, including pump speed,  ow rates,  ow direction, and batch
totals.
• Volume, Time, Continuous, and Analog Input modes for quick and easy operation.
• User selectable dispense volumes, tube diameters,  ow rates, pump speeds, and run times.
• Easy user management with three levels of access: ADMIN, SUPER USER and USER.
• Wi-Fi and Ethernet connectivity.
• Brushless, maintenance-free motor o ering ±0.1% speed control accuracy with a turndown ratio greater
than 6000:1.
• Easy pump priming and tube calibration.
• L/S models have a maximum speed of 600 RPM and  ow rate capacities that range from .001 mL/min
through to 3400 mL/min (depending on the model and tubing size selected).