To Next PageTo Next Page
Need help?Do you have a question about the Masterflex L/S Series and is the answer not in the manual?
Explains the meaning of safety symbols used in the manual.
Defines the intended use and restrictions for the product.
Provides a general overview of the Masterflex L/S High-Performance Pump Head's capabilities.
Details requirements for connecting the pump head to compatible Masterflex L/S pump drives.
Step-by-step instructions for securely attaching the pump head to the drive unit.
Information on compatible Masterflex L/S tubing sizes for the pump head.
Instructions on how to properly install tubing into the pump head.
Guidance on starting and operating the pump head after setup.
Lists available part numbers for maintenance and replacement of pump head components.
Instructions for cleaning the pump head and rotor assembly using appropriate methods.
Presents performance data for thin wall tubing with different L/S sizes.
Presents performance data for thick wall tubing with different L/S sizes.
Details the product warranty terms, limitations, and duration.
Provides instructions and procedures for returning the product for service or replacement.
Information on how to contact support for questions regarding product use.
General| Speed Range | 0.1 to 600 rpm |
|---|---|
| Accuracy | ±0.5% of set rate |
| Materials | Stainless steel, aluminum, and plastic |
| Material | Stainless steel, aluminum, and plastic |
| Weight | Varies by model (typically 2 to 10 kg) |
| Dimensions | Varies depending on drive and pump head; typically 15 x 20 x 25 cm (drive only) |
