What to do if the Masterflex ISMATEC 78018-50 motor doesn't rotate and the display is off?
First, ensure the power cord is securely plugged into the drive and then confirm it's properly connected to a working mains power outlet. Also, check the power cord for any visible damage and replace it if necessary.
Why is the touchscreen on my Masterflex ISMATEC 78018-50 Water Pump unresponsive?
The touchscreen might be unresponsive if you are wearing thick latex gloves. Removing your gloves before using the touchscreen may resolve this issue. Remember to consult your company or laboratory safety guidelines before removing any personal protective equipment.
How to improve weak calibration strength on Masterflex ISMATEC 78018-50?
To improve calibration accuracy, use a larger calibration volume and/or alter the flow rate.
Essential safety guidelines and precautions for operating the REGLO Digital Pump Drive.
Overview of REGLO Digital Pump Drive features, package contents, models, and specifications.
Visual guide to the icons used on the REGLO Digital Pump Drive touchscreen interface.
Precautions before use, pump preparation, and power-on procedures for the REGLO drive.
Configuring language, time, date, display, alerts, and analog output settings for the drive.
Managing device info, screen saver, name, Wi-Fi, and Ethernet settings.
Managing user access levels and configuring auto-start functionality.
Procedures for priming pump heads and performing gear/piston pump head calibration.
Navigating modes, and operating the pump in continuous, time, and volume dispensing modes.
Configuring anti-drip and using the volume record feature for fluid dispensing.
Controlling the pump via analog input, MasterflexLive™, and custom programs.
Procedures for updating firmware and restoring the pump drive to factory defaults.
Guidelines for flushing, cleaning, replacing, and mounting pump heads and drives.
Details on accessories, connections, troubleshooting, errors, specs, and support.
General| Pump Type | Peristaltic |
|---|---|
| Drive Type | Digital |
| Speed Range | 1 to 100 rpm |
| Number of Channels | 1 |
| Power Supply | 100 to 240 VAC, 50/60 Hz |
| Pump Head Material | Polyphenylene sulfide (PPS) |
| Control Type | Manual |
| Motor Type | DC motor |
| Operating Temperature | 0 to 40°C |
| Hose Inner Diameter | 0.13 to 3.17 mm |
| Tube Material | Various, depending on application (e.g., silicone, Tygon) |
To Next Page
