Why is my Masterflex I/P MASTERSENSE MFLX77421-00 Water Pump touchscreen unresponsive?
If the touchscreen of your Masterflex Water Pump is not responding, it might be due to wearing thick latex gloves. Remove your gloves before using the touchscreen. Be sure to consult your company or laboratory safety guidelines before removing any personal protective equipment.
What to do if Masterflex I/P MASTERSENSE MFLX77421-00 Water Pump motor does not rotate and display is off?
If the motor of your Masterflex Water Pump does not rotate and the display doesn't light up, the issue might be due to a lack of power. Here are a few things you can check: 1. Ensure the power cord is securely plugged into the drive. 2. Verify the power cord is plugged into the mains power outlet and that the power is switched on. 3. Inspect the power cord for any visible signs of damage and replace it if it's defective.
How to improve calibration strength on Masterflex Water Pump?
If the calibration strength bar on your Masterflex Water Pump displays a weak calibration strength, this could be due to a poor calibration volume or flow rate. You can improve calibration accuracy by using a larger calibration volume and/or altering the flow rate.
General| Pump Type | Peristaltic |
|---|---|
| Motor Type | Brushless DC |
| Power Supply | 100-240 VAC, 50/60 Hz |
| Display | LCD |
| Control Interface | Digital |
| Max Pressure | 40 psi (2.8 bar) |
To Next Page
