4-1 Masterflex
®
I/P
®
MasterSense™ Process Drives
Section 4: Communication Specification
Masterflex
SECTION 4: COMMUNICATION SPECIFICATION
ETHERNET/IP MODE
In Ethernet/IP mode, the pump can be operated in Continuous, Volume and Time modes. e pump drives
are equipped with Ethernet/IP for real time control via a PLC. e .EDS command le is avialable for down-
load on the ODVA website:
https://marketplace.odva.org/products/1923-master ex?lang=en
Ethernet/IP Setup
Ensure that your Pump and PLC along with your computer are all connected to the same network. Also,
make sure the computer’s IP address is within the subnet mask range of the PLC and the pump. e default
addressing methods for the pump is DHCP. Static IP address may be assigned through the Ethernet settings
menu.
To Next Page
Loading...
