Masterflex I/P MASTERSENSE MFLX77421-00 - Section 5: Service & Maintenance; Firmware Updates; Restore Factory Settings

5-1 Masterflex
®
I/P
®
MasterSense™ Process Drives
Section 5: Service & Maintenance
Masterflex
SECTION 5: SERVICE & MAINTENANCE
!
CAUTION: Replace the power cord only with one of the same type and rating.
!
CAUTION: Unplug the pump drive’s power cable from the mains power outlet when cleaning
or performing maintenance on the drive.
FIRMWARE UPDATES
If the I/P is connected to the internet, updates can be downloaded directly onto the pump drive. NOTE:
When new updates are available for your device, the update available
icon will be displayed at the top of
the Settings Menu Screen.
To update I/P:
1. Tap SETTINGS
from any of the mode screens.  e Settings Screen will be displayed.
2. SCROLL
through the Settings Screen pages to locate DEVICE INFORMATION.
3. Tap DEVICE INFORMATION.  e Device Information Screen will be displayed.
4. Tap CHECK FOR UPDATES and follow the onscreen prompts.
If the L/S is not connected to the internet, updates must be downloaded onto a USB drive before installing
onto the pump drive. Visit
www.master ex.com to download the latest updates for your device.
To install updates from a USB drive:
1. Insert the USB drive containing the updates into the pump drive’s USB port.
2. Tap SETTINGS
from any of the mode screens.  e Settings Screen will be displayed.
3. SCROLL
through the Settings Screen pages to locate DEVICE INFORMATION.
4. Tap DEVICE INFORMATION.
5. Tap CHECK FOR UPDATES and follow the onscreen prompts.
RESTORE FACTORY SETTINGS
NOTE: Factory reset will erase all settings, including custom programs.
To restore the pump to the original factory defaults:
1. Tap SETTINGS
from any of the mode screens.  e Settings Screen will be displayed.
2. SCROLL
through the Settings Screen pages to locate DEVICE INFORMATION.
3. Tap DEVICE INFORMATION.
4. Tap FACTORY RESET and follow the onscreen prompts.