About the Scan Tool
INITIAL ADJUSTMENTS
5
2 - Repair immediately if drivability issues are present. Threat to
essential system components if not repaired as soon as possible.
3 - Stop and repair vehicle immediately to prevent interrelated
failures. Harmful and damaging to essential system components.
14.
Bluetooth icon – Indicates communication status with a
compatible mobile application (please visit matco.carscan.com for
more information). A solid blue icon indicates an active Bluetooth
connection has been established. A solid grey icon indicates
Bluetooth is not connected.
15.
WiFi icon – Indicates WiFi communication status. When ON,
indicates the scan tool is linked to a WiFi network. When OFF,
indicates there is no WiFi connection.
INITIAL ADJUSTMENTS
The first time the unit is connected to a vehicle, you must select the
desired display language (English, French or Spanish), unit of
measurement (USA or Metric) and Smog Check or I/M Program
Location as follows:
1. Select the desired display language, then press MENU/ENTER
.
The Select Unit screen displays.
2. Select the desired unit of measurement, then press MENU/ENTER
.
The Select Smog Check or I/M Program Location screen
displays.
3. Select the appropriate location from the options provided, then press
MENU/ENTER
. If you do not wish to specify a Select Smog
Check or I/M Program Location at this time, select Exit, then press
MENU/ENTER
.
The Version Information screen displays briefly, then the Scan
Tool begins communication with the vehicle.
After the initial language, unit of measurement and Smog
Check or I/M Program Location selections are performed,
these, as well as other settings, can be changed as desired.
Proceed to
Additional Functions
on page 33 for further
instructions.
To Next Page
Loading...
