Matrix A7XI-01 - Troubleshooting - Error 0140; 014 D

64
8.6 TROUBLESHOOTING - ERROR 0140 / 014D
CHAPTER 8: TROUBLESHOOTING
FIGURE A
ERROR CODE 0140 / 01AD
1) SYMPTOM:
0140 – PCB communication disconnected.
014D – Incline no action & Incline no current
2) SOLUTION:
1) Follow the instructions in Section 4.8 to run Auto Calibration (Figure A).
2) If the error code happens during Auto Calibration, the machine will still work, no need to do anything.
3) If the error code happens during a workout, replace the incline motor.