Matrix S-Drive - Page 23

21
cHaPTer 6: TreaDmill SPecificaTionS anD aSSembly GUiDe
6.3 aSSembly inSTrUcTionS - conTinUeD
C
D
STeP 3
STeP 4
RedHardwareBags(x2)
Description Qty
C Bolt 4
Note:
Do not fully tighten hardware until the end of
step 5.
Step3TorqueValue:78.4Nm/57.8ft-lb
WhiteHardwareBag
Description Qty
D Bolt 4
Note:
Do not fully tighten hardware until the end
of step 5.
Step4TorqueValue:39.2Nm/28.9ft-lb