Matrix T5X-04 - Error Messages on Console

20
8.4 ERROR MESSAGES ON THE CONSOLE
CLASS
LEVEL
ERROR
CODE
DESCRIPTION
B 0140 Incline motor operation fail.
B 0141 Motor over temperature.
B 0143 Drive disconnected.
B 0144 Motor overloaded.
C 01A0 Incline motor is disconnected.
C 01A2 Incline motor is detected in the reverse of the position indicated by the potentiometer.
C 01A3 Motor is disconnected.
C 01A4 Main motor U phase disconnection.
C 01A5 Main motor V phase disconnection.
C 01A6 Main motor W phase disconnection.
C 01A7 Incine motor over current.
C 01A8 Motor over current.
C 01AB Inverter Error.
C 01AD Motor over loading.
B 0241 Lower DC bus voltage.
B 029F Generic Class B Error.
C 02A2 Over DC bus voltage.
C 02A7 Motor over current.
C 02AC Motor out of control (speed too high).
C 02AD MCB over temperature.
C 02B2 Safety key signal is not received.
C 02B3 Machine type error.
C 02B5 Invertersensesthatthenormalratedcurrentisover150%for60seconds.
C 02B6 Speed up has over current.
C 02B7 Speed down has over current.
C 02B8 Running status is over current.
C 02B9 The inner memory IC data write error.
C 02BA The inner memory IC data read error.
C 02BB Inverter inner line of communication error.
C 02BC Ground connection error.
C 02BD Inverter hardware interruption error.
B 0440 Timeout packet received.
B 0441 Correct packet received but MCB has no function.
C 04A0 MCB No communication received.
C 04B0 Console no communication received.
Class Level
ClassB=Themachinewillkeepworkingandloganerror.
ClassC=Themachinewillstop.
CHAPTER 8: TROUBLESHOOTING