27
1) To enter Service Mode, press "ENTER 3001 ENTER" on the number keypad and Service Mode will appear on the display.
2) Service Mode is divided into 4 tabs, located on the left side of the screen. They are Setup, Test, Log, and Date & Time.
3) Choose a tab by touching the screen over the desired tab.
4) Each of the tabs have options that will appear once you have chosen that particular tab.
5) Press the "HOME" button or the EMERGENCY STOP to exit Service Mode..
CHAPTER 7: SERVICE MODE
7.1 USING SERVICE MODE
To Next Page
Loading...
