51
1. If you have a status light on the controller but the On/Off
button gives no response, disconnect and then reconnect the power to
the treadmill from the wall. Attempt to turn on the TV again using the On/
Off button.
2. If TV still does not power on, remove the console back (Figure A) and
check the controller connections at the console (Figure B).
3. If the TV does not power on after the controller connections are reset,
the issue it is likely with the TV itself, contact Matrix.
8.7.4 ENTERTAINMENT TROUBLESHOOTING - CONTROLLER ISSUES
FIGURE A
FIGURE B
CHAPTER 8: TROUBLESHOOTING
To Next Page
Loading...
