Matrox Millennium Installation Guide 17
MGA Settings utility
With MGA Settings you can select a monitor and configure various driver parameters such as font
size, EnDIVE (Enhanced Direct Interface Video Extensions), and a hardware zoom hot key, as well
as view an information page.
The MGA Settings notebook is available from the
System Setup
folder, or directly from your
desktop by clicking on the
MGA Settings
icon.
Monitor configuration
If your monitor is Plug-and-Play (VESA DDC-compliant) the driver will automatically use an
appropriate refresh rate. If not, our driver will use the default refresh rate of 60 Hz, unless you specify
a monitor using our
MGA Settings
utility. This program creates a file called
mga.inf
, which contains
the appropriate video parameters for your monitor. The
mga.inf
file is read by the MGA display driver
when OS/2 boots.
To Next Page
Loading...
