Matrox Millenium - Installation Overview

Matrox Millennium Release Note – Page 2 of 4
Installation overview
To install the Matrox Millennium:
1
Install the hardware. See “Quick hardware installation” in the
Installation Guide
.
2
Install the software. See the software section (Windows 95, 3.1, NT, OS/2 or CAD)
of the
Installation Guide
that applies to you.
Installation of MGA PowerDesk software for Windows 95
If you install the Millennium graphics card on a system with Windows 95 already installed,
Windows 95 will detect the new graphics card after you restart your computer and may
automatically load the Microsoft version of the MGA display drivers. Do not use the MGA
driver provided by Windows 95. It does not support MGA PowerDesk. Use the driver
supplied on the Matrox CD-ROM. Follow the instructions in the “Installing MGA
PowerDesk software for Windows 95” section of the
Installation Guide
.