Matrox Millenium - Plug-and-Play Monitor Support

22 Matrox Millennium Installation Guide
Plug-and-Play monitor support
Plug-and-Play monitors are VESA DDC-2B compliant. DDC monitors send their timing
parameters to the Millennium card, which then uses the appropriate timings for each resolution.
Many DDC monitors do not report that they are capable of 1152 × 864 or 1600 × 1200 resolutions.
To use these resolutions, or to use higher refresh rates or timings than those reported by the monitor
to the Millennium card, use the MGA monitor selection method. See the
MGA PowerDesk for
Windows
(
3.1
or
95
) on-line documentation for more information.