Matsui DMS2-80 - Page 28

Chapter 3 Installation
- 24 -
Step Item Task
2 Confirming
dehumidifying unit
condition
Please check the following units before lift and move the dehumidifying
unit main body.
Please make sure that eyebolts (4 pieces) on the device are fastened
as picture 24 shows.
Bolts with holes (4 pieces)
Picture 24
Make sure that the flat knob on the control board is installed. As picture
25 shows.
Picture 25
平面把手
）
Flat knob
(with lock)