Chapter 1 Safety Precautions
- 1 -
Using the device please must observe the notice items.
Notice items Notice content
The device is a dehumidifying unit that only the resin pill is available.
Other materials will cause the malfunction of the device. As the
malfunction caused by the materials except the resin pill is not within
the maintenance range, please contact us before using other
materials.
The application of
the device
Please do not use the volatile and the flammable materials. Or the
fire disaster may happen. In addition, our company takes no
responsibility of the malfunction caused by the gas volatility.
The operating conditions
Operating the device in the room.
Operating in the environment within the temperature 0℃ to 40℃
Dying temperature
Setting the temperature suitable to use the resin pill and within the
temperature range indicated by the manual. Never operate the
device outside the temperature range. Or accidents and
malfunction may occur.
After the specified drying time, please provide the raw material for
the device.
During the operation, do not open straight shrunk, the cleaning vent
and the takeoff exit for the remaining materials. Dangerous if the
material or hot wind is blew out.
The notice items in
operation
During the operation, do not open the door of the control board.
Do not impinge heavily or sprinkle water on the device. Or the
malfunction and fire disaster may occur.
Control board
Temperature regulator
If unnecessary, do not open the door. Or the malfunction and the
accident may occur.
Maintenance inspection
Before the maintenance inspection, the key “off” of the power
breaker in the control panel should be pressed to cut off the power.
When machine operates with pneumatic engine, the pneumatic
engine should stop working and remove the remaining air pressure
for the inspection.
In a spell after the device stops running, the high temperature
remains. So please carry out the inspection aft
(5 hours for natural cooling). Although the exterior of the device has
cooled off, the interior and the drying material may still be in high
temperature, so pay thousands close of attentions.
To Next Page
Loading...
