INTRODUCTION
- III -
1.The product
The manual introduces how to properly operate Dehumidifying Hot Air
Dryer and the maintenance as well as the inspection measures.
2. The readers
The customers who whether use Dehumidifying Hot Air Dryer by
MATSUI Company for the first time or have the experience to use the
product all should read the manual carefully.
3. Maintenance
The product is created by integrate the designing and the
manufacturing techniques of both the limited company and the MATSUI
factory. If the product has problems, with the identification of our
company the problem part can be repaired or replaced according to the
conditions below.
1）The range of the maintenance
The maintenance ranges are reparation and the replacement of
the spare parts. The problems on goods produced by the
machines or devices of our company and the production are
without the maintenance ranges. Under the normal operating
conditions, if the machine or the device has malfunctions
obviously due to the designing and the producing defects, our
company will repair the problem unit without any charges on
spare parts and reparation within the indicated period.
1)-A．The range to deliver goods is confined in China.
1)-B．The defect spare parts should be given back to our company.
1)-C．The maintenance period is within (12) twelve months from
the day to purchase our products.
1)-D．The maintenance period of the parts below is within (12)
twelve months from the purchasing day.
1.Electrical devices and the spare parts 2. Sealing material
3.bearing 4.Waterial level gauge
2）Without the range of maintenance
2)-A．Without the range of maintenance
1.The malfunction resulted in the environmental change.
2.The damage brought out by the defect of rendering
product.
3.The breakage due to the time change.
4.The function without impacts on the quality.
5.The malfunction caused by your renovation on the product.
6.Light, fuse, consumables
2)-B．The company takes no responsibility on the damage or
malfunction caused by the accidents below.
1. The natural calamity including Earthquake, typhoon, flood,
fire disaster.
2. The breakage caused by using outside the general
installation sites.
3. The breakage caused intentionally or unintentionally by
not observing the manual’s instruction on the operation
and maintenance inspection.
4. The malfunction caused by the incomplete or incorrect
maintenance or fitting.
5. The malfunction caused by the portage, moving
installation in your company after taking the delivering.
To Next Page
Loading...
