Matsui VP9408 - Checking VIDEO Plus+ or Timer Recordings

28
Introduction &
Contents
Installing your
VCR
Setting up your
VCR
Playing a
Video Tape
Recording
Programmes
Advanced
Features
Help and
Specification
22
22
33
33
44
44
11
11
Checking VIDEO Plus+ or Timer Recordings
You can easily check the details of a timer recording before it takes place. After a timer recording has taken place it will automatically
be removed from the timer event menu.
SELECT : / ENTER
CLEAR : CANCEL
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
:
:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
:
:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
:
:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
:
:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
:
:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
:
:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
:
:
8 MON 11 : 46 11 : 58 3 SP
EXIT : MENU
Press the ENTER button.
The timer event menu will appear.
If you wish to amend a timer
recording, press PLAY or STOP to
highlight the recording then press
the ENTER button.
Select a recording
SELECT
TIMER REC SET
START
SET
EXIT
END
MENU
DATE
CH
SPEED
PDC
8 MON
11:46
11:58
3
SP
OFF
OK
ENTER
See page 26 for details on setting
the timer recording.
After checking the details,
repeatedly press the MENU button
to clear the screen.
Check or amend the
details
ON SCREEN PROGRAMMING
AUTO TUNE & SORT SYSTEM = NTSC PLAYBACK
Press TIMER SET to put your VCR
back into timer record mode if
there are any more recording to be
made. If you do not, the recordings
will not take place.
Reset timer record
mode
If your VCR is in timer record mode
press the TIMER SET button to
switch on your VCR.
The timer set symbol will go out.
Press MENU.
Press the PLAY or STOP buttons to
highlight TIMER REC SET.
Cancel timer record
mode
VP9408.qxd 14/04/00 14:59 Page 28