Maverick MK2 Spot - Page 20

Operation
Maverick MK2 Spot User Manual Rev. 4 -17-
Fan Speed
To set the speed of the fans, do the following:
Navigate to the Settings menu. 1.
Use <UP> or <DOWN> to select Fans, or touch the display where it says Fans. 2.
If using the buttons instead of the touchscreen, press <ENTER>. 3.
Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Auto (fan speed set according to product 4.
temperature), Full (maximum speed), or ECO (quiet fans mode), or touch the display where it
says the desired option.
Press <ENTER>.
5.
Dimmer Curve
To set the dimmer curve, follow the instructions below:
Navigate to the Settings menu. 1.
Use <UP> or <DOWN> to select Dimmer Curve, or touch the display where it says Dimmer 2.
Curve.
If using the buttons instead of the touchscreen, press <ENTER>. 3.
Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Linear, Square, I Squa, or SCurve, or 4.
touch the display where it says the desired option.
Press <ENTER>.
5.
Dimmer Speed
To set the dimmer speed, do the following:
Navigate to the Settings menu. 1.
Use <UP> or <DOWN> to select Dimmer Speed, or touch the display where it says Dimmer 2.
Speed.
If using the buttons instead of the touchscreen, press <ENTER>. 3.
Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Smooth or Fast, or touch the display 4.
where it says the desired option.
Press <ENTER>.
5.
Reset Functions
To reset the pan, tilt, or all functions as if from startup:
Navigate to the Settings menu. 1.
Use <UP> or <DOWN> to select Reset Function, or touch the display where it says Reset 2.
Function.
If using the buttons instead of the touchscreen, press <ENTER>. 3.
Use <UP> or <DOWN> to select the function to reset, from Pan/Tilt, Iris/Prism, 4.
Color/CMY+CTO, Gobo/Gobo Rotate, Zoom/Frost/Focus or All, or touch the display where it
says the desired option.
If using the buttons instead of the touchscreen, press <ENTER>. 5.
Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select from NO (do not reset) or YES (reset), or 6.
touch the display where it says the desired option.
Press <ENTER>.
7.
Factory Reset
To restore the Maverick MK2 Spot to factory default settings, do the following:
Navigate to the Settings menu. 1.
Use <UP> or <DOWN> to select Factory Settings, or touch the display where it says Factory 2.
Settings.
If using the buttons instead of the touchscreen, press <ENTER>. 3.
Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (do not reset) or YES (reset to factory 4.
settings), or touch the display where it says the desired option.
Press <ENTER>.
5.