Positive Displacement Flow Meters
Piston Type, P-Series 3000 psi (210 bar) rated
* See temp chart in product manual.
** Receiver portion of 2 part transmitters are not rated Ex-Proof, consult factory.
† Not available for hazardous location use. (Exceeds 130°C temp. Limit.)
Product includes single directional calibration, bi-directional
calibrations for Analog and Quadrature devices are optional.
Flow Meter Selections Transmitter Selections
Model # MS
/ /
0
-
Non-Standard Options
Bi-Directional Cal: BID
0 Transmitter Type
Max Flow Range Output Type
1.8 Liters/Min P213 A A 4-20mA Output - Powered by 24 Vdc
10 Liters/Min P214 A B 4-20mA Output - Powered by 12 Vdc
35 Liters/Min P215 A C 0-10 Volt Output - Powered by 24 Vdc
A D 0-10 Volt Output - Powered by 12 Vdc
P N 5V Pulse/Freq. - Powered by 5-26 Vdc
Q N 5V Quadrature - Powered by 5-26 Vdc
P S Current Sinking, Single Phase
Pressure Temperature Rating
3000 psi (210 bar) MS 1 90°C Industrial / 75°C Haz-Loc
2 130°C Haz-Loc, 2 Part **
Fluid Connection
3 225°C Industrial, 2 Part †
NPT 1
Electrical Connection
SAE 2 1 Industrial, Turck® Connector
Manifold
(Not available on model P215)
4 2 Hazardous Location, 1/2 Inch Conduit*
Seal Selection
Viton® - FKM 1
Signal Type
Te on® - PTFE 3 P Pulse
Per uoroelastomer - FFKM 5 A Analog
Neoprene 7 Q Quadrature
Options
None NA
Heat Trace Option HT
To Next Page
Loading...
