CD 30 ÷ 520
27
Easy control, energy saving
When unit is running, the controller can automatically adjust each module’s capacity
output or turn on, shut down the corresponding modules according to the system
requirement.
Each unit applies dual compressors that can achieve the best effect of energy saving
by further elaborated adjustment.
Micro computer controller can ensure the system running with high efficiency by the
auto control functions such as intelligent defrosting, problems analyzing, energy
management, anti-freeze inspecting and running mode, etc.
Orderly starting, intelligent memorizing
When unit turns on, the controller can automatically start corresponding modules
successively according to actual capacity requirement.
The controller can automatically store start sequence and running hours of each
module, so if running hours of one module has reached the pre-set standard, system
will shut off this module, and start another. The module with shorter time to energize will
be turned on first in the next operation, so it can be achieved to make a balance among
modules to extend the life of system.
Remote & internet control.
Each unit has one electric control system, which can accomplish independently the
such functions as order input, control output, trouble solving, protection, etc.
The communication between system and human can be achieved by linear controller,
which can receive the customers’ operation orders and send them to main controller, as
well as collect the running data and display them on the screen.
Matched RS485 communication interface achieve the remote monitoring function,
furthermore it can be connected to Internet by using the reserved computer interface.
To Next Page
Loading...
