The DLCA is a digital load cell amplifier which provides
excitation voltage for load cells and amplifies the returned
millivolt signal which is proportional to applied force into a 0
to 10VDC, 4 to 20 maDC, and a 0 to1maDC signal. The DLCA
also shows the signal converted into a digital readout in
engineering units representing applied force. All calibrations
and setup are entered using three buttons and 4-digit
display. Tension is displayed using three significant digits.
The DLCA has a front panel tension zero button and a digital
input to remotely zero the tension. The DLCA has an alarm
output which can be programmed to activate at either a high
or low tension threshold. Load cell diagnostics run during
power-up.
The model number and serial number are shown on the
bottom of the enclosure.
The model number consists of the base model "DLCA"
followed by optional alphanumeric characters.
Model format: DLCA
Serial number format: MMDDYYNNNL
To Next Page
Loading...