Maxon EPOS4 - CANopen Data Link Layer

Motherboard Design Guide
Requirements for Components of Third-party Suppliers
EPOS4 EtherCAT Card Hardware Reference
4-24 CCMC | 2019-11 | rel8613
4.2.6 Recommended Components and Manufacturers
Table 4-14 Motherboard Design Guide – Recommended components
Recommended components
Card Edge
Connector
(EXT1)
PCIe 2x18 Position, THT
• Amphenol FCI (10018784-10200TLF)
• Sullins Connector Solutions (NWE18DHHN-T911)
• TE Connectivity (7-1734774-6)
Retainer for Card
Edge Connector
(optional)
PCI express retainer
• Amphenol FCI (10042618-002LF)
EtherCAT Two Port
Modular Jack
(X14/X15)
• Amphenol (RJHSE-5381-02)
• Würth (615016137721)
TVS Diode
(D1)
• Vishay (SMBJ54A)
U
R
= 54 V, U
BR
= 60.0…66.3 V @ 1 mA, U
C
= 87.1 V @ 6.9 A
• Fairchild (SMBJ54A)
U
R
= 54 V, U
BR
= 60.0…66.3 V @ 1 mA, U
C
= 87.1 V @ 6.9 A
• Littelfuse (SMBJ54A)
U
R
= 54 V, U
BR
= 60.0…66.3 V @ 1 mA, U
C
= 87.1 V @ 6.9 A
LED
(D2)
Dual-sided SMT LED green/red
• Lite-On (LTST-S326KGJRKT)
• Dialight (597-2751-607F)
• Avago (HSMF-C144)
Decoupling
(Rp/Cp)
R/C chip combination
• Chip resistor 1 M Ω, 0.25 W, 500 V
• Chip capacitor 10 nF, 500 V