Maxon GPT-4 - Stowing the Liftgate

11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713
19
Remove nut from positive (+) battery terminal connector. Connect Power Cable to the positive
(+) battery terminal connector (FIG. 19-1). Re-install and tighten nut.
FIG. 19-1
POSITIVE (+)
BATTERY TERMINAL
FUSED
POWER CABLE
BOLT
NUT
STEP 7 - CONNECT POWER CABLE TO BATTERY
NOTE: MAXON recommends using dielectric
grease on all electrical connections.