11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713
32
STEP 17 - VEHICLE TAILLIGHT POSITIONING
Install vehicle taillights (FIG. 32-
1) as shown in FIG. 32-2 and
FIG. 32-3.
TAILLIGHTS HORIZONTAL SPACING (FRONT VIEW)
FIG. 32-3
TAILLIGHTS POSITION (TOP VIEW)
FIG. 32-2
VEHICLE TAILLIGHTS INSTALLED ON LIFTGATE
FIG. 32-1
24”
24”
30”
14”
TAILLIGHTS
ANGLE STEEL
(NOT SUPPLIED)
PLATFORM OPENER
(REFERENCE)
EXTENSION
PLATE
(REFERENCE)
MAIN
FRAME
GROUND LEVEL
TAILLIGHT
ANGLE STEEL
(NOT SUPPLIED)
TAILLIGHTS
PLATFORM OPENER
(REFERENCE)
TAILLIGHT
OPTIONAL
UNDERRIDE
(REFERENCE)
OPTIONAL
UNDERRIDE
(REFERENCE)
(IF REQUIRED)
NOTE: Positions are based on using taillights of 6-3/4” height by 5-3/4” width. Larger
taillights may interfere with Liftgate. Taillights and attaching hardware are not
provided with the Liftgate. Underride is optional equipment.
To Next Page
Loading...
