11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713
7
2. Fit Liftgate to a truck body by cutting the truck frame members as shown in FIG. 7-1.
STEP 1 PREPARE VEHICLE - Continued
NOTE: If installing Liftgate on a trailer, skip frame cutting instructions in Item 2.
CUTS FOR GPT-25, GPT-3, GPT-4 & GPT-5
FIG. 7-1
22-1/2”
4-1/2”
TRUCK
FRAME
12”
TOP OF TRUCK
BODY FLOOR
2-11/16”
20”
To prevent Aluminum Platform from being damaged, make sure Truck Frame is cut
correctly as shown in the illustration below. If the Frame is cut incorrectly, Platform
may hit the Truck Frame while stowing Liftgate.
CAUTION
To Next Page
Loading...
