Intelimax+4G User Manual
- 13 -
MODE M SETU P
Intelimax+ serial modem supports a Windows GUI software, where by you can configure
the modem via serial/USB connection or remotely via the WAN IP.
Maxon recommends using the GUI connected via a TCP/IP connection in order to utilise
all the configuration settings. When connecting to the Intelimax+ using the GUI when the
modem is in serial modem mode, there will be very limited functionality.
After connecting to the modem using the GUI, users can configure; WAN settings,
Scheduler, IP Stack, SNMP Dynamic DNS and Admin settings.
To Next Page
Loading...