Maxon Intelimax+4G - WAN Configuration Tab; WAN Operation Modes

Intelimax+4G User Manual
- 19 -
WAN Configuration TAB
WAN configuration page is used to configure how the modem will connect to the
3G/4G network. Please select the correct operation mode as this will decide if the
modem will automatically connect to the network on power up or work in pass through
mode.
The Intelimax+ supports 6 operation modes:
1. IP Stack Auto mode
2. IP Stack Manual mode
3. Serial mode (Pass-through/Transparent)
4. PPP WAN Auto mode
5. PPP WAN Conditional mode
6. PPP WAN Manual mode