Maxon Intelimax+4G - FTP File Logging and Upload Examples

To Next Page

To Previous Page

Intelimax+4G User Manual

- 33 -

The log file will have a standard prefix used here with a suffix in the format of

DDMMYYYHHMMSS, where D is day, M is month, Y is year, H is hour in 24-hour format, M is

minutes, and S is seconds. E.g. DHMAX10102017181146.csv.

The "size of file" parameter is used for limiting the file size of the csv file. All the input from

serial port will be saved in the .csv file, and once the file size of that csv file exceeds the

size limit, another file will be created to hold the input. The value allowed is 1000 -

100*1000 Bytes.

Note: A reboot is required when enabling, disabling or making changes to the FTP

options.

Based on the configuration, the file could be uploaded to server periodically. For

example:

With these settings, the modem will send a .csv file to the FTP server every 30 minutes. If

the input has not exceeded limit 10K bytes (in this case), modem will send this file only,

then generate another file for holding future input. If the input is more than 10K bytes,

there should be more than one file generated, each file should not exceed 10K bytes,

all these files will be sent to FTP server when time comes.

File uploaded with date time stamp disabled:

AT+CSQ

File uploaded with date time stamp enabled:

09/11/2012 15:44:05 AT+CSQ

09/11/2012 15:44:06 AT+CSQ