Intelimax+4G User Manual
- 41 -
No Dial mode means the client PPP will initiate PPP connection without any dialling string
being sent prior to PPP session. THIS IS NOT CURRENTLY SUPPORTED.
Other PPP Options
Authentication
PPP server intends to support 3 authentication modes: None, CHAP and PAP. Whenever
CHAP or PAP authentication mode is selected, the username and password should be
provided as well, otherwise, these two fields can be left blank. The authentication is NOT
currently supported in firmware and will be implemented in future releases.
MRU
Maximum Receive Unit. The PPP server will ask the client to send packets of no more than
[MRU] bytes. The value must be between 128 and 16384; the default is 1500.
Idle Timeout
This is to specify that PPP server should disconnect if the PPP link is idle (No data traffic) for
[Idle] seconds.
Port Forwarding
The ‘Forward’ section is for entering the port forwarding options with the following format:
To Next Page
Loading...