Maxon Intelimax+4G - SMS Commands in IP and Serial Modes

Intelimax+4G User Manual
- 57 -
INTELIMAX.PARK.DDNS2 <domain name>,<user id>,<user password/key>
e.g. INTELIMAX.PARK.DDNS2 inte.dyndns.biz,maxon,max@123
▪ Change mode via SMS
SMS Syntax:
INTELIMAX.PARK.CHGMODE <1(IPStack Auto)/2(IPStack Manual)/3(Serial
Modem)>
e.g. INTELIMAX.PARK.CHGMODE 1
Reply message syntax: Mode Change To <mode>
e.g. Mode Change To IPStack Auto
The modem will automatically reboot after sending the response.
Commands in Serial Modem mode
The Intelimax+ SMS commands can also be used when modem is in serial modem mode.
For this to happen the modem must be told to intercept the SMS messages using the
AT$$STEALTHSMS command:
AT$$STEALTHSMS?
$$STEALTHSMS: 0
OK
AT$$STEALTHSMS=0 – disable modem interception of SMS messages
OK
AT$$STEALTHSMS=1 – modem to intercept SMS message
OK
▪ Reboot Intelimax+
SMS Syntax: INTELIMAX.PARK.REBOOT
▪ RSSI Info
SMS Syntax: INTELIMAX.PARK.RSSI
Reply message syntax: RSSI <value> e.g. RSSI -57
▪ Change mode via SMS
SMS Syntax:
INTELIMAX.PARK.CHGMODE <1(IPStack Auto)/2(IPStack
Manual)/3(Serial Modem)>
e.g. INTELIMAX.PARK.CHGMODE 1
Reply message syntax: Mode Change To <mode>
e.g. Mode Change To IPStack Auto