Maxon Intelimax+4G - Telnet WAN Scheduler and UART;Serial Port

Intelimax+4G User Manual
- 68 -
2 - 3. WAN Scheduler
This command will allow users to control WAN
connection in a specified time.
Day of
week[0~6],
Start
hour[0~23],
Start
Minutes[0~59]
, Start
hour[0~23],
Start
Minutes[0~59]
, Engine
power [0, 1]
E.g.: Scheduler 1: 0,0,0,23,59,1  Sunday from 0:)0 to
23:59 scheduler with engine power off
4. UART/Serial Port
This command allows users to configure serial setting e.g.
baud rate, data bit, stop bit, parity, and flow control
5. IPSTACK
Modem will be configured to use onboard IPSTACK. This
option
allows changing IPSTACK Protocol (TCP/UDP), IPSTACK Port
and configuring client and server IP address.
WAN