Intelimax+4G User Manual
- 83 -
message to less than 10 characters. Please save and apply settings before using.
AT$$FTPCS?
AT$$FTPCS: 1,192.168.10.1:21,maxon,maxon,0,INTELIMAX+,1000,1
OK
Parameters
$$FTPCS: X,X,X,X,X,X,X,X
0
- Disable
1
- Manual
2 - Hourly (0 - 24)
3
- Time of day (0 - 24)
4
- Day of month (1 - 31 days)
5
– Minutes (0 - 60)
•
Host IP/Domain address with Port
•
User name
•
Password
•
Time interval
•
Header of file name (limit 10 bytes/characters)
•
Size of file (Bytes) – maximum 102,400 bytes, maximum internal buffer size 10MB
•
A new file will be created each time the file size is exceeded.
•
Time stamp – enable (1) or disable (0) timestamp prefix (in seconds)
A reboot is required when enabling, disabling or making changes to the FTP options.
Examples:
AT command to upload every 1 hour.
AT$$FTPCS=2,20.19.62.23:21,maxon,maxon,1,FILEHEADER,10000,0
AT command to upload every 30 minutes.
AT$$FTPCS=5, 20.19.62.23:21,maxon,maxon,30,FILEHEADER,10000,0
AT command to upload every day at 8PM.
AT$$FTPCS=3, 20.19.62.23:21,maxon,maxon,20,FILEHEADER,10000,0
AT command to upload every 15
th
day of the month.
AT$$FTPCS=4, 20.19.62.23:21,maxon,maxon,15,FILEHEADER,10000,0
1.
In the example above file size is 10000 bytes.
2.
The modem would create a text file using name specified above (in
the example I have used “fileheader” as the filename)
3.
The last setting 0 or 1 decides if the data is time stamped. 0 will only log data
To Next Page
Loading...