Maxon Intelimax+4G - AT Commands: FTP Upload, Signal Strength, and Connection Management

Intelimax+4G User Manual
- 85 -
AT$$FTPSC
OK
Will start the FTP connection and upload the files. Can be used to force an upload
When in periodic mode. If no WAN connection is currently established (such as in IP Stack
Manual mode) the Intelimax+ will establish the PPP and socket connections, upload the
FTP files then drop the socket and PPP connections.
Signal Strength
AT+CSQ?
+CSQ: 25,99
OK
Open PPP connection
AT$$IPCTOP
Close PPP connection
AT$$IPCTCP
Open TCP/UDP Socket
AT$$IPCTOS
Close TCP/UDP Socket
AT$$IPCTCS
Change Remote Server IP address
AT$$IPCTRIP=0,ip,ad,dr,ess,<port>
Eg. AT$$IPCTRIP=0,123,456,789,01,30000
Change client/server mode
AT$$IPCFL=4,<0,1> where 0 for server, 1 for client
Eg. AT$$IPCFL=4,0 sets modem to server mode
IPStack Connection Settings
AT$$IPSCFG?