EasyManua.ls Logo

Maxon Intelimax+4G - AT Commands: SMS on Boot and Modmax Compatibility

Maxon Intelimax+4G
94 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Intelimax+4G User Manual
- 89 -
SMS on Boot
The Intelimax+ can be configured to send an SMS at boot time using the following AT
commands:
at$$pwronsms
at$$pwronsms=?
$$PWRONSMS=1,0/1 enable/disable
$$PWRONSMS=2,1/2/3,Phone Number up to 3 phone numbers
$$PWRONSMS=3,Message
Prepare modem for hard shutdown
This function is highly recommended when using the modem with an external,
controlled power supply. If the modem is going to have its power dropped regularly this
AT command allows for the processor to perform housekeeping duties to ensure that
the shutdown process does not damage the modem or internal cellular module. Wait
for at least 4 seconds after issuing the command before dropping power to the modem.
AT$$RTD
OK
Modmax Compatibility Mode
AT$$SPC
This changes the IP Stack responses from Intelimax+ style responses to Modmax style
responses.
ntelimax+ Mode (Mode 0)
Modmax Mode (Mode 1)
$$TCP_Connect_To: 125.181.12.34
[01/24/2014 08:00:36]
[18:57:55 28 JAN 2014]
$$TCP_Connect_To: 192.168.10.50
[01/24/2014 08:05:36]
[Connection_Close_By_Timed_Out]
[08:31:12 24 JAN 2014] TCP connection
disconnected
AT$$SPC?
$$SPC: <mode>
OK
<mode>:
0: mode 0 (Default)
1: mode 1
2: mode 2