MAXPhotonics MA1 Series User Manual

Warning:
◎Please be cautious of the following optical safety measures:
The laser output is transmitted through a window. Ensure that these windows are
clean and of high quality. Any dust on the head assembly may cause damage to
both the window and the laser. Periodically inspect the quality of the laser output
spot, initially at low power levels, and then progressively increase the output
power.
Avoid direct observation of the laser hole, such as the output optical fiber or the
welding connector, when the device is powered on. It is mandatory to wear safety
glasses, a helmet, and a face mask while operating or handling the product.
Individuals in close proximity must also wear the same safety gear.
Ensure that all personal protective equipment (PPE) is appropriate for the power
output and wavelength range specified on the laser safety label affixed to the
product.
Warning:
◎ While operating a laser, refrain from gazing directly into the output port.
◎ Ensure that the laser and all associated optical components are not placed at eye level.
◎ Refrain from utilizing lasers in dimly lit surroundings.
◎ Furnish a protective casing for the laser beam.
16

MAXPhotonics MA1 Series Specifications

General

Brand	MAXPhotonics
Model	MA1 Series
Category	Welding System
Language	English