MAXPhotonics MFSC - Chapter 4 Specification; 1 -Optics Characteristic Parameters

18
Chapter 4
Specication
1 -Optics Characteristic Parameters
No. Characteristics Test conditions Min. Nom. Max. Unit
1 Operation mode CW/Modulated
2 Polarization Random
3
Output power MFSC-2000W 100% CW 2000 W
Output power MFSC-3000W 100% CW 3000 W
4 Tuning range of output power 10 100 %
5 Emission wavelength 100% CW 1070 1080 1090 nm
6 Spectrum width(3dB) 100% CW 3 5 nm
7 Short-term power instability 100% CW>1h ±1 ±2 %
8 Long-term power instability 100% CW>24h ±3 ±5 %
9 Beam quality BPP
50um-QBH
Output
1.1 1.5
mm x
mrad
100um-QBH
Output
2.8 3.6
mm x
mrad
10 Laser switching ON time 100 150 μs
11 Laser switching OFF time 100 150 μs
12 Modulation rate 100%Output 5 KHz
13 Red guide laser power 100%Output 200 μW
14
Feeding ber cable length
MFSC-2000W
50um-QBH
Output
15 m
Feeding ber cable length
MFSC-3000W
50um-QBH
Output
20 m
15 Feeding ber core size 50
（
100
、
200 optional
）
μm
16
Feeding ber cable bending
radius
200 mm
17 Output form Standard QBH
（
LOC
）