25
Chapter 5 Unpacking Guide
2 -Packing List
CAUTION:
◎
If any damage of the external package and internal parts has been found
upon receipt of product, please contact Maxphotonics Co., Ltd. or designated
agent immediately.
◎
When the laser is turned off, the water cooler should also be turned off to
prevent condensation from occurring due to excessive temperature difference.
RECOMMENDATION:
Change the working temperature or humidity of the laser to keep the laser away
from the dew point. (For example, install the laser in an air-conditioned room.)
No. Names of fittings Description Unit Quantity
1 Fiber Laser MFSC -xxxx Pc 1
2 External signal wire Pc 1
3 Power Keys Pc 2
4 Lens cleaning paper Pc 4
5
Sample of water pipe of
laser
Ф19.1*Ф29mm Pc 1
6
QBH water pipe sample
tube
Ф6x4mm Pc 1
7 Cable 10m Pc 1
8 Hose clamp
American hose clamp,
clamping range Ф26-Ф38
Pc 2
To Next Page
Loading...
